collapse

Author Topic: PS4 Single Handed Controller Deployed (part 7 of 7)  (Read 4787 times)

Gareth

  • Guest
PS4 Single Handed Controller Deployed (part 7 of 7)
« on: December 30, 2019, 09:52:29 AM »
Last part of a 7 part series.
Making a "PS4 Left Single Handed Controller"

(workflow might be of interest if you rewind to "Part 1"  8)
In a nutshell I was asked to make a single left handed PS4 controller for a person who is recovering from a "Stroke".

 Good news is the PS4 left handed controller is finished and in transit ... with Merlin in tow.



My game controller skills were good enough to shoot a "Striker Mech" in the rear-end (not the best place apparently).
It is quite a comfortable grip and I was able to play for a couple of hours.....per day...for a week...just to test...



All controls were implemented, using original switch internals where possible.



Merlin went off with the package, he is guarding the Digital pad (many iterations and test prints went into this to get just that right feel).



Menu buttons sweet and simple, and to the right is the "look around" joystick.



Beneath the whole controller is the movement joystick which sits on your knee or cushion, so pushing the whole controller side to side or backwards/forwards or pressing down give the appropriate response, this effectively illuminates the use of a second hand....(win win).

Comfy, ergonomic and easily adjustable... you might notice the bottom buttons are on slide rails, which I could adjust for best fit and then epoxied to fix permanently




« Last Edit: December 30, 2019, 10:04:57 AM by Gareth »

 

* Search


* Recent Topics

The unnamed (yet) quatruped spider project by tinhead
[July 01, 2020, 04:22:11 PM]


"1984 Nixie Time" by 1 what
[May 08, 2020, 01:04:18 AM]


2D Side Scroller Cyberpunk themed by Killer Angel
[February 06, 2020, 06:39:40 AM]


A new wing design for model aircraft / drones by OddBot
[February 06, 2020, 04:42:06 AM]


SDR (Software Defined Radio) by Gareth
[February 02, 2020, 06:15:42 AM]


Circuit Math by ZeroMax
[January 31, 2020, 01:50:18 PM]


NanOMeter by Protowrxs
[January 01, 2020, 12:59:44 PM]


Investigating the VL53L0X Laser Rangefinder by erco
[December 30, 2019, 10:45:44 PM]


PS4 Single Handed Controller Deployed (part 7 of 7) by Gareth
[December 30, 2019, 09:52:29 AM]


"D" -Pad Workio just like Magic (Will Merlin stay or Go) (part 6 of 7) by Gareth
[December 30, 2019, 09:51:27 AM]


PS4 Joystick Digitals 4,5,6,7,10 - Analog's Lx,Ly,Rx,Ry Workio (part 5 of 7) by Gareth
[December 30, 2019, 09:50:37 AM]


Menu Workio ! (part 4 of 7) by Gareth
[December 30, 2019, 09:49:49 AM]


L1 trigger design Workio (Hori controller) (part 3 of 7) by Gareth
[December 30, 2019, 09:48:50 AM]


Hori aka PS4 Joystick Mappings (part 2 of 7) by Gareth
[December 30, 2019, 09:47:17 AM]


PS4 Single Left-Handed Controller (part 1 of 7) by Gareth
[December 30, 2019, 09:44:58 AM]

* Recent Posts

Re: The unnamed (yet) quatruped spider project by tinhead
[July 01, 2020, 04:22:11 PM]


Re: The unnamed (yet) quatruped spider project by jinx
[July 01, 2020, 04:06:19 PM]


Re: "1984 Nixie Time" by 1 what
[May 08, 2020, 01:04:18 AM]


Re: "1984 Nixie Time" by tomasp
[April 13, 2020, 06:03:28 PM]


Re: 2D Side Scroller Cyberpunk themed by Killer Angel
[February 06, 2020, 06:39:40 AM]


A new wing design for model aircraft / drones by OddBot
[February 06, 2020, 04:42:06 AM]


Re: "1984 Nixie Time" by Gareth
[February 02, 2020, 06:23:01 AM]


Re: SDR (Software Defined Radio) by Gareth
[February 02, 2020, 06:15:42 AM]


Re: SDR (Software Defined Radio) by ZeroMax
[January 31, 2020, 01:54:21 PM]


Re: "1984 Nixie Time" by ZeroMax
[January 31, 2020, 01:52:29 PM]


Circuit Math by ZeroMax
[January 31, 2020, 01:50:18 PM]


Re: 2D Side Scroller Cyberpunk themed by ZeroMax
[January 31, 2020, 01:45:33 PM]


NanOMeter by Protowrxs
[January 01, 2020, 12:59:44 PM]


Re: Investigating the VL53L0X Laser Rangefinder by erco
[December 30, 2019, 10:45:44 PM]


PS4 Single Handed Controller Deployed (part 7 of 7) by Gareth
[December 30, 2019, 09:52:29 AM]