collapse

Author Topic: Cross slide vice  (Read 1902 times)

jinx

  • calling from free Europe
  • Sr. Member
  • *****
  • Posts: 469
Cross slide vice
« on: July 28, 2017, 03:26:57 PM »


    In preparation for my adventures with metal working I got myself a cross slide vice of ebay  for £20 "yeap you can be to cheap to say this thing is a rough factory second would be an understatement. from the un boxing it was clear there was no love for it from the sender! no secure packaging here.

       
   
      Just no finishing to it and a bit of oil,  had to tear it clean and sand few spaces add a little grease on the threaded appears a little binding on  on the clamp itself but still usable.
     

     4" to big for my bench drill should be looking at 3" but am sure I make it fit for what I need. to be honest £20 was just to cheap!.
 
    sat on the drill bench,





     

     

« Last Edit: July 29, 2017, 03:34:09 PM by jinx »
I build bots

danphobic_

  • Member
  • *
  • Posts: 48
  • personal text?
Re: Cross slide vice
« Reply #1 on: July 29, 2017, 10:10:11 AM »
That's a pretty nice bit of kit!!

 

* Search


* Recent Topics

"1984 Nixie Time" by 1 what
[May 08, 2020, 01:04:18 AM]


2D Side Scroller Cyberpunk themed by Killer Angel
[February 06, 2020, 06:39:40 AM]


A new wing design for model aircraft / drones by OddBot
[February 06, 2020, 04:42:06 AM]


SDR (Software Defined Radio) by Gareth
[February 02, 2020, 06:15:42 AM]


Circuit Math by ZeroMax
[January 31, 2020, 01:50:18 PM]


NanOMeter by Protowrxs
[January 01, 2020, 12:59:44 PM]


Investigating the VL53L0X Laser Rangefinder by erco
[December 30, 2019, 10:45:44 PM]


PS4 Single Handed Controller Deployed (part 7 of 7) by Gareth
[December 30, 2019, 09:52:29 AM]


"D" -Pad Workio just like Magic (Will Merlin stay or Go) (part 6 of 7) by Gareth
[December 30, 2019, 09:51:27 AM]


PS4 Joystick Digitals 4,5,6,7,10 - Analog's Lx,Ly,Rx,Ry Workio (part 5 of 7) by Gareth
[December 30, 2019, 09:50:37 AM]


Menu Workio ! (part 4 of 7) by Gareth
[December 30, 2019, 09:49:49 AM]


L1 trigger design Workio (Hori controller) (part 3 of 7) by Gareth
[December 30, 2019, 09:48:50 AM]


Hori aka PS4 Joystick Mappings (part 2 of 7) by Gareth
[December 30, 2019, 09:47:17 AM]


PS4 Single Left-Handed Controller (part 1 of 7) by Gareth
[December 30, 2019, 09:44:58 AM]


Time of Flight >>> Rounded Corners !!! by BaldwinK
[December 04, 2019, 05:46:08 PM]

* Recent Posts

Re: "1984 Nixie Time" by 1 what
[May 08, 2020, 01:04:18 AM]


Re: "1984 Nixie Time" by tomasp
[April 13, 2020, 06:03:28 PM]


Re: 2D Side Scroller Cyberpunk themed by Killer Angel
[February 06, 2020, 06:39:40 AM]


A new wing design for model aircraft / drones by OddBot
[February 06, 2020, 04:42:06 AM]


Re: "1984 Nixie Time" by Gareth
[February 02, 2020, 06:23:01 AM]


Re: SDR (Software Defined Radio) by Gareth
[February 02, 2020, 06:15:42 AM]


Re: SDR (Software Defined Radio) by ZeroMax
[January 31, 2020, 01:54:21 PM]


Re: "1984 Nixie Time" by ZeroMax
[January 31, 2020, 01:52:29 PM]


Circuit Math by ZeroMax
[January 31, 2020, 01:50:18 PM]


Re: 2D Side Scroller Cyberpunk themed by ZeroMax
[January 31, 2020, 01:45:33 PM]


NanOMeter by Protowrxs
[January 01, 2020, 12:59:44 PM]


Re: Investigating the VL53L0X Laser Rangefinder by erco
[December 30, 2019, 10:45:44 PM]


PS4 Single Handed Controller Deployed (part 7 of 7) by Gareth
[December 30, 2019, 09:52:29 AM]


"D" -Pad Workio just like Magic (Will Merlin stay or Go) (part 6 of 7) by Gareth
[December 30, 2019, 09:51:27 AM]


PS4 Joystick Digitals 4,5,6,7,10 - Analog's Lx,Ly,Rx,Ry Workio (part 5 of 7) by Gareth
[December 30, 2019, 09:50:37 AM]