collapse

Author Topic: Yes I am alive!  (Read 2255 times)

nschreiber0813

  • Member
  • ****
  • Posts: 15
Yes I am alive!
« on: February 25, 2019, 02:08:12 PM »
So I am Noah Schreiber. I have been a member of this site since it's early founding. I just never posted anything on here or at least very little because I also run a discord server that is a lot like this site and personally I think it's better in some ways, and I was a member of the RobotShop community until I lost my patience with them.

I am fairly close to a 3D printing expert. I don't want to say I am a 3D printing expert since nobody can be an expert on anything since there is so much to know but I am close enough as it gets. Jinxy and a bunch of people at my school were really the ones that got my inspired to jump into the field. Jinxy sent me some parts for a rostock mini that I had failed to put together and source the parts but it was his motivation and numerous others including my own parents that made me be so knowledgable in the field today.

I have had 3 3D printers in my life time. Each one of them I either built myself or heavily modded. For more information I would recommend you check out my youtube channel. Thanks!

https://www.youtube.com/channel/UCTqCD4qnuBhLN_4aYw-pg9g


nschreiber0813

  • Member
  • ****
  • Posts: 15
Re: Yes I am alive!
« Reply #1 on: March 09, 2019, 03:59:04 PM »
I speak english and only english.

jinx

  • calling from free Europe
  • Sr. Member
  • *****
  • Posts: 469
Re: Yes I am alive!
« Reply #2 on: March 10, 2019, 04:38:53 AM »
me thinks Jessking a spam bot!
I build bots

 

* Search


* Recent Topics

"1984 Nixie Time" by 1 what
[May 08, 2020, 01:04:18 AM]


2D Side Scroller Cyberpunk themed by Killer Angel
[February 06, 2020, 06:39:40 AM]


A new wing design for model aircraft / drones by OddBot
[February 06, 2020, 04:42:06 AM]


SDR (Software Defined Radio) by Gareth
[February 02, 2020, 06:15:42 AM]


Circuit Math by ZeroMax
[January 31, 2020, 01:50:18 PM]


NanOMeter by Protowrxs
[January 01, 2020, 12:59:44 PM]


Investigating the VL53L0X Laser Rangefinder by erco
[December 30, 2019, 10:45:44 PM]


PS4 Single Handed Controller Deployed (part 7 of 7) by Gareth
[December 30, 2019, 09:52:29 AM]


"D" -Pad Workio just like Magic (Will Merlin stay or Go) (part 6 of 7) by Gareth
[December 30, 2019, 09:51:27 AM]


PS4 Joystick Digitals 4,5,6,7,10 - Analog's Lx,Ly,Rx,Ry Workio (part 5 of 7) by Gareth
[December 30, 2019, 09:50:37 AM]


Menu Workio ! (part 4 of 7) by Gareth
[December 30, 2019, 09:49:49 AM]


L1 trigger design Workio (Hori controller) (part 3 of 7) by Gareth
[December 30, 2019, 09:48:50 AM]


Hori aka PS4 Joystick Mappings (part 2 of 7) by Gareth
[December 30, 2019, 09:47:17 AM]


PS4 Single Left-Handed Controller (part 1 of 7) by Gareth
[December 30, 2019, 09:44:58 AM]


Time of Flight >>> Rounded Corners !!! by BaldwinK
[December 04, 2019, 05:46:08 PM]

* Recent Posts

Re: "1984 Nixie Time" by 1 what
[May 08, 2020, 01:04:18 AM]


Re: "1984 Nixie Time" by tomasp
[April 13, 2020, 06:03:28 PM]


Re: 2D Side Scroller Cyberpunk themed by Killer Angel
[February 06, 2020, 06:39:40 AM]


A new wing design for model aircraft / drones by OddBot
[February 06, 2020, 04:42:06 AM]


Re: "1984 Nixie Time" by Gareth
[February 02, 2020, 06:23:01 AM]


Re: SDR (Software Defined Radio) by Gareth
[February 02, 2020, 06:15:42 AM]


Re: SDR (Software Defined Radio) by ZeroMax
[January 31, 2020, 01:54:21 PM]


Re: "1984 Nixie Time" by ZeroMax
[January 31, 2020, 01:52:29 PM]


Circuit Math by ZeroMax
[January 31, 2020, 01:50:18 PM]


Re: 2D Side Scroller Cyberpunk themed by ZeroMax
[January 31, 2020, 01:45:33 PM]


NanOMeter by Protowrxs
[January 01, 2020, 12:59:44 PM]


Re: Investigating the VL53L0X Laser Rangefinder by erco
[December 30, 2019, 10:45:44 PM]


PS4 Single Handed Controller Deployed (part 7 of 7) by Gareth
[December 30, 2019, 09:52:29 AM]


"D" -Pad Workio just like Magic (Will Merlin stay or Go) (part 6 of 7) by Gareth
[December 30, 2019, 09:51:27 AM]


PS4 Joystick Digitals 4,5,6,7,10 - Analog's Lx,Ly,Rx,Ry Workio (part 5 of 7) by Gareth
[December 30, 2019, 09:50:37 AM]