RobotRebels.org

Other Projects => Everything else => Topic started by: ZeroMax on January 31, 2020, 01:50:18 PM

Title: Circuit Math
Post by: ZeroMax on January 31, 2020, 01:50:18 PM
I'm doing a little more CV synth stuff and wondered if anyone had any predictions: If I put a voltage divider pot set up with the "high" side supplied by a 5v output pin from a microcontroller, and then put a Diode/Capacitor voltage doubler on the wiper of that, at what time to the two trains pass each other am I going to get 0-10v on the out of that, or am I going to smoke the controller?