collapse

Welcome!





Welcome to Robot Rebels, an online robot maker community.

Register today to post your projects, ask questions, share
knowledge and meet like-minded people from around the world.


-the RobotRebel.org community


James
September 01, 2019, 07:45:19 PM by James
Views: 791 | Comments: 3


Current state of the MSD

The Motorized solder dispenser

They say necessity is the mother of invention. I can't say that this is an example of that, but it's 'extreme feature creep' at least.   ;D I have an RGB LED kit I hope to assemble that has a LOT of surface mount parts to solder. I plan to hand solder everything, one component value at a time, with some very small diameter solder. I was thinking about trying to hold the almost limp solder and not buggering everything up in the process. Then as I pondered that problem, I thought a little hand held solder dispenser must surely exist already, but a lot of googling tol...
Gareth
August 15, 2019, 06:16:37 AM by Gareth
Views: 1050 | Comments: 6


Needed an additional clock for my 2nd fallout shelter, electronics are now operational, so thought it best to share current iteration.

What you see here is the High voltage / opto isolator /  Nixie driver board.
Current Shopping list :-
  • ESP32
  • Batch of New Old Stock Cold War Nixies
  • NE555 timer chip to develop the High Tension voltage via a flyback inductor.
  • DS3231 Real Time
...
Gareth
August 06, 2019, 11:12:09 AM by Gareth
Views: 1380 | Comments: 2


Software defined radio (aka SDR), is a way of automating tuning into Audio/Digital radio receptions.

I am using a very simple (un-nervingly sensitive) USB dongle type RTL-SDR.COM

(cost inclusive antenna & mount was < £25).


This is able to tune through a huge spectrum of frequencies 0hz!! > 2.5Ghz

On a basic level it will tune into music radio station.....how ever where is the fun in that......

Also covers all the Radio Amateur bands , Dab radio and also Dab TV....etcetera

I am cu...
James
July 28, 2019, 08:30:41 PM by James
Views: 993 | Comments: 0



Hello Rebels!

I use CAD at work all day and recently a new drafter was talking about getting a custom macro pad called a streamdeck. The thing is basically a tablet with buttons on top so you can change the button icons to anything based on the application. While that looks cool and all, I encouraged him to try his hand at building his own macro pad with an arduino. As it turned out, he was not super interested in it, but at that point I already started working on one myself.  ;D

I found a 4x5 keypad on ebay that came with a plate, switches, and clear keycaps to make your own symbols. I used a pro micro, rainbow wire, small signal diodes & brass wire to make the mat...
May 21, 2019, 10:20:42 AM by BaldwinK | Views: 1016 | Comments: 2

This tool finds the relationship between servo pulse time and rotational angle. A simple brief that uncovered a number of tricky issues.

When constructing any robot that moves, work has to be done to define the movement. If using pulsed servos then this ‘definition’ will likely be in µS and quite specific to the actual motor. Should the motor fail and be replaced, or a second bot made, then the definition will no longer be accurate.

Calibrating each joint in degrees, rather than µS, will remove the need to redo the original work.

So an optical shaft encoder is coupled to the joint ‘axle’ to act as an electronic protractor. Then a rotary switch is used to manually find the mechanical limits of the joint plus ...
Pages: [1] 2 3 ... 29

* Search


* Recent Topics

Saturn pics anyone by James
[September 17, 2019, 08:09:06 AM]


Hello Robot Rebels by Passixs
[September 15, 2019, 10:19:10 PM]


All Ya'll. And me. by James
[September 09, 2019, 10:35:19 PM]


MSD - Motorized solder dispenser (Work in progress) by James
[September 09, 2019, 08:45:29 PM]


It may be dangerous to work in the virtual realm by ZeroMax
[September 05, 2019, 05:55:16 PM]


"1984 Nixie Time" by Gareth
[August 25, 2019, 12:21:58 PM]


Just wanted to say Hi. by ErwinCanto
[August 18, 2019, 10:11:28 PM]


SDR (Software Defined Radio) by Gareth
[August 14, 2019, 01:12:21 PM]


PLX-DAQ by AmandaG
[August 06, 2019, 01:58:42 PM]


DIY Yellow Servo by AmandaG
[August 06, 2019, 01:08:09 PM]


Comp? :o by Impala
[August 02, 2019, 07:32:20 PM]


Website to do list by Killer Angel
[August 02, 2019, 05:38:30 AM]


I Like the new front page! by James
[July 31, 2019, 12:29:53 AM]


Pictures on the front page! by tinhead
[July 30, 2019, 05:17:20 AM]


4x5 Macro Keypad by James
[July 28, 2019, 08:30:41 PM]

* Recent Posts

Re: Saturn pics anyone by James
[September 17, 2019, 08:09:06 AM]


Re: Saturn pics anyone by Passixs
[September 15, 2019, 10:23:38 PM]


Re: Hello Robot Rebels by Passixs
[September 15, 2019, 10:19:10 PM]


Re: All Ya'll. And me. by James
[September 09, 2019, 10:35:19 PM]


Re: MSD - Motorized solder dispenser (Work in progress) by James
[September 09, 2019, 08:45:29 PM]


Re: MSD - Motorized solder dispenser (Work in progress) by arclite7
[September 08, 2019, 04:17:21 AM]


Re: MSD - Motorized solder dispenser (Work in progress) by Gareth
[September 06, 2019, 05:18:40 AM]


All Ya'll. And me. by ZeroMax
[September 05, 2019, 05:56:35 PM]


Re: It may be dangerous to work in the virtual realm by ZeroMax
[September 05, 2019, 05:55:16 PM]


MSD - Motorized solder dispenser (Work in progress) by James
[September 01, 2019, 07:45:19 PM]


"1984 Nixie Time" Update 20190825 by Gareth
[August 25, 2019, 12:21:58 PM]


Re: "1984 Nixie Time" - Update 20190822 by Gareth
[August 22, 2019, 05:59:29 AM]


Re: "1984 Nixie Time" - Update by Gareth
[August 20, 2019, 11:15:36 AM]


Re: "1984 Nixie Time" by Bajdi
[August 20, 2019, 09:35:39 AM]


Just wanted to say Hi. by ErwinCanto
[August 18, 2019, 10:11:28 PM]

* New Members

* Who's Online

  • Dot Guests: 46
  • Dot Spiders: 1
  • Dot Hidden: 0
  • Dot Users: 0
  • Dot Users Online:
  • user Baidu