collapse

Welcome!



Welcome to Robot Rebels, an online robot maker community.

Register today to post your projects, ask questions, share knowledge and meet like-minded people from around the world.


The RobotRebel.org Community

Author Topic: removable magnetic print surface  (Read 287 times)

jinx

  • calling from free Europe
  • Moderator
  • Sr. Member
  • *****
  • Posts: 445
removable magnetic print surface
« on: October 12, 2018, 03:13:37 AM »
 
                      
           
                           Description on ali as Magnetic Print Bed Tape square Print Sticker Flex Plate, in short its a removable magnetic print surface,and perhaps the best development in build plates since the introduction of thermal polymer sheets for a print surface, PLA sticks so well to this material its possible to ruin a Z axis of a hypercube  removing a print. from what I can find its seems to be an unbranded copy of easy-peelzy. 

               
      arrives 2 weeks after ordering sandwiched between a makeshift cardboard envelope and a plastic bag.
     

               

          Installation is really easy you be done in 5 minutes, I ordered the 214*214 which completely covers the heat bed so with scissor cut of the corners for the spring/bolt head,I use M3 dome heads which never extrude above the new print surface. (no risk of catching a bolt with the nozzle!)  Next pull off the 3M backing tape of part B and gently roll the magnetic tape across the HB. (it take some effort to put a kink in it!) Then trim of the excess and you done, I used a scalpel for a clean cut. Now take the top print surface place that on the bed  "line it up with the rear and trim the sides the front should have a small overlap leave this as is, it helps removing prints later on.

             

overall: Price wise just can't grumble little over £13 including postage, its about the best thermal sheet option out there (you can spend that on a static build surface and fight with the little shit getting the print off!).
       Its great so far after four months of testing, never had a print fail with lifting or curling..  printing with PLA with a bed temperature of 50C been as low 40C with short prints (under an hour). you get the bed level you can achieve a near smooth metallic finish look for the first layer, and once the print finish just lift the plate off and slowly bend the surface the print just rolls of. 
 
           

          Though the surface want stay a matt black for long each print leaves it's ghostly impression on the surface.

something to keep in mind though they are producing higher temp surfaces for ABS theses days.
        Warning: Do not expose Easy-Peelzy to heat over 80 °C or 176 °F, or your Easy-Peelzy risk demagnetizing! Due to the magnetic nature of Easy-Peelzy, magnetic printer bed leveling sensors might not work with it.

links:
https://www.3d-easy.xyz/

buy one!: where I got one from
https://www.aliexpress.com/item/2018-New-Magnetic-Print-Bed-Tape-square-150-200-214-220-250mm-Print-Sticker-Build-Plate/32871643572.html?spm=a2g0s.9042311.0.0.48e54c4dyNmL2z
I build bots

Gareth

  • Member
  • ****
  • Posts: 52
Re: removable magnetic print surface
« Reply #1 on: November 09, 2018, 10:53:45 AM »
Thanks for explaining the ins and outs of the magnetic levitation beds, I have placed an order via Banggood (ali-ex don't except paypal)

 

* Search


* Recent Topics

Time of Flight >>> Rounded Corners !!! by Gareth
[November 15, 2018, 03:21:51 PM]


Double_ing up the "Time of Flight" sensors by Gareth
[November 13, 2018, 04:05:02 AM]


Point cloud anyone !!! maybe 3D scanner by maelh
[November 11, 2018, 05:38:33 AM]


removable magnetic print surface by Gareth
[November 09, 2018, 10:53:45 AM]


Robot Cop by Valeriex
[November 07, 2018, 05:48:20 AM]


it's lukeyes by Valeriex
[November 07, 2018, 05:47:16 AM]


TOF gets a local DEBUG screen by Gareth
[November 07, 2018, 03:47:29 AM]


BlueTooth elves choose "BlueTeeth" by Gareth
[November 07, 2018, 03:40:19 AM]


Yup, it is me... ...CtC by ZeroMax
[November 05, 2018, 07:14:09 PM]


Four Motor Leg Module by DWRobotics
[November 04, 2018, 05:15:49 PM]


MKS Gen L 1.0 by terragady
[November 02, 2018, 12:15:09 PM]


Do you think he pushed the train in the last lap, G? by Gareth
[November 01, 2018, 05:57:58 PM]


IBM buys Red Hat by jinx
[October 30, 2018, 04:09:07 AM]


QTC - quantum tunneling composite. Can we make our own sensors? by OddBot
[October 27, 2018, 02:14:52 PM]


[ Firmware ] Klipper - the cool firmware for 3d Printers by tinhead
[October 03, 2018, 12:29:14 PM]

* Recent Posts

Re: Time of Flight >>> Rounded Corners !!! by Gareth
[November 15, 2018, 03:21:51 PM]


Re: Time of Flight >>> Rounded Corners !!! by Gareth
[November 15, 2018, 03:13:11 PM]


Re: Time of Flight >>> Rounded Corners !!! by MEgg
[November 14, 2018, 06:26:08 PM]


Re: Time of Flight >>> Rounded Corners !!! by MEgg
[November 14, 2018, 05:57:24 PM]


Re: Time of Flight >>> Rounded Corners !!! by Gareth
[November 13, 2018, 04:07:31 AM]


Re: Double_ing up the "Time of Flight" sensors by Gareth
[November 13, 2018, 04:05:02 AM]


Re: Time of Flight >>> Rounded Corners !!! by Gareth
[November 13, 2018, 03:53:46 AM]


Re: Time of Flight >>> Rounded Corners !!! by Gareth
[November 13, 2018, 03:45:41 AM]


Re: Time of Flight >>> Rounded Corners !!! by MEgg
[November 12, 2018, 01:01:49 PM]


Re: Point cloud anyone !!! maybe 3D scanner by maelh
[November 11, 2018, 05:38:33 AM]


Re: Time of Flight >>> Rounded Corners !!! by maelh
[November 11, 2018, 05:25:15 AM]


Re: Double_ing up the "Time of Flight" sensors by maelh
[November 11, 2018, 05:22:23 AM]


Re: removable magnetic print surface by Gareth
[November 09, 2018, 10:53:45 AM]


Re: Robot Cop by Valeriex
[November 07, 2018, 05:48:20 AM]


Re: it's lukeyes by Valeriex
[November 07, 2018, 05:47:16 AM]