collapse

Welcome!



Welcome to Robot Rebels, an online robot maker community.

Register today to post your projects, ask questions, share knowledge and meet like-minded people from around the world.


The RobotRebel.org Community

Author Topic: UConduit H-Bot printer design  (Read 464 times)

KingBeetle

  • Member
  • ****
  • K
  • Posts: 22
UConduit H-Bot printer design
« on: May 26, 2018, 02:10:38 PM »
I came across this design for an H-Bot 3D printer that utilizes inexpensive EMT thin wall electrical conduit for the frame, and wondered if anyone here has ever built or even seen one?



https://www.thingiverse.com/thing:102972
http://reprap.org/wiki/Uconduit
https://github.com/iquizzle/uconduit

It looks like it would be really solid while still remaining inexpensive to build. All of the information is four to five years old though and it doesn't look like any further development has occurred. There are only a handful of videos on YouTube, and several of them are the original developer's videos. It seems as if the design never really "took off", although I don't see any reason why not.

 

* Search


* Recent Topics

Time of Flight >>> Rounded Corners !!! by Gareth
[Today at 04:07:31 AM]


Double_ing up the "Time of Flight" sensors by Gareth
[Today at 04:05:02 AM]


Point cloud anyone !!! maybe 3D scanner by maelh
[November 11, 2018, 05:38:33 AM]


removable magnetic print surface by Gareth
[November 09, 2018, 10:53:45 AM]


Robot Cop by Valeriex
[November 07, 2018, 05:48:20 AM]


it's lukeyes by Valeriex
[November 07, 2018, 05:47:16 AM]


TOF gets a local DEBUG screen by Gareth
[November 07, 2018, 03:47:29 AM]


BlueTooth elves choose "BlueTeeth" by Gareth
[November 07, 2018, 03:40:19 AM]


Yup, it is me... ...CtC by ZeroMax
[November 05, 2018, 07:14:09 PM]


Four Motor Leg Module by DWRobotics
[November 04, 2018, 05:15:49 PM]


MKS Gen L 1.0 by terragady
[November 02, 2018, 12:15:09 PM]


Do you think he pushed the train in the last lap, G? by Gareth
[November 01, 2018, 05:57:58 PM]


IBM buys Red Hat by jinx
[October 30, 2018, 04:09:07 AM]


QTC - quantum tunneling composite. Can we make our own sensors? by OddBot
[October 27, 2018, 02:14:52 PM]


[ Firmware ] Klipper - the cool firmware for 3d Printers by tinhead
[October 03, 2018, 12:29:14 PM]

* Recent Posts

Re: Time of Flight >>> Rounded Corners !!! by Gareth
[Today at 04:07:31 AM]


Re: Double_ing up the "Time of Flight" sensors by Gareth
[Today at 04:05:02 AM]


Re: Time of Flight >>> Rounded Corners !!! by Gareth
[Today at 03:53:46 AM]


Re: Time of Flight >>> Rounded Corners !!! by Gareth
[Today at 03:45:41 AM]


Re: Time of Flight >>> Rounded Corners !!! by MEgg
[November 12, 2018, 01:01:49 PM]


Re: Point cloud anyone !!! maybe 3D scanner by maelh
[November 11, 2018, 05:38:33 AM]


Re: Time of Flight >>> Rounded Corners !!! by maelh
[November 11, 2018, 05:25:15 AM]


Re: Double_ing up the "Time of Flight" sensors by maelh
[November 11, 2018, 05:22:23 AM]


Re: removable magnetic print surface by Gareth
[November 09, 2018, 10:53:45 AM]


Re: Robot Cop by Valeriex
[November 07, 2018, 05:48:20 AM]


Re: it's lukeyes by Valeriex
[November 07, 2018, 05:47:16 AM]


TOF gets a local DEBUG screen by Gareth
[November 07, 2018, 03:47:29 AM]


Time of Flight >>> Rounded Corners !!! by Gareth
[November 07, 2018, 03:46:01 AM]


Point cloud anyone !!! maybe 3D scanner by Gareth
[November 07, 2018, 03:44:49 AM]


Double_ing up the "Time of Flight" sensors by Gareth
[November 07, 2018, 03:42:30 AM]