collapse

Welcome!



Welcome to Robot Rebels, an online robot maker community.

Register today to post your projects, ask questions, share knowledge and meet like-minded people from around the world.


The RobotRebel.org Community

Author Topic: MKS Gen L 1.0  (Read 80610 times)

jinx

  • calling from free Europe
  • Moderator
  • Sr. Member
  • *****
  • Posts: 449
Re: MKS Gen L 1.0
« Reply #30 on: January 29, 2019, 07:31:47 AM »
i had a similar problem once with unstable temp reading recall I re-flashed both the board and controller from mks  which solved it
I build bots

printergreg

  • Member
  • ****
  • p
  • Posts: 2
Re: MKS Gen L 1.0
« Reply #31 on: February 03, 2019, 12:41:10 PM »
i had a similar problem once with unstable temp reading recall I re-flashed both the board and controller from mks  which solved it
Thanks for the idea, jinx.  I had been flashing through USB with Octoprint and the Firmware Updater plugin, so I gave it a shot through ISP headers with a raspberry pi (https://learn.adafruit.com/program-an-avr-or-arduino-using-raspberry-pi-gpio-pins/overview).  Everything worked, woohoo!  And then I unplugged the 6 pins on the ISP headers... and the problem was back >_<  As long as there's 5V and ground on those ISP pins, everything is great though so I'm going to work with that and try to make a cable harness to take it off the USB rail to feed those ISP pins.

 

* Search


* Recent Topics

Fun Fact by Impala
[February 13, 2019, 11:05:01 PM]


Animabot Rev3 - Advanced Hexapod Robot by Smashley
[February 05, 2019, 03:41:50 PM]


MKS Gen L 1.0 by printergreg
[February 03, 2019, 12:41:10 PM]


Finally tried out a Chinese PCB service by Bajdi
[February 02, 2019, 08:40:49 AM]


PLX-DAQ by BaldwinK
[January 16, 2019, 06:44:18 AM]


Four Motor Leg Module by BaldwinK
[January 09, 2019, 04:55:14 PM]


Android Adware by Diegotorry
[January 08, 2019, 05:34:48 AM]


Hi, Mushroom glue here. by Diegotorry
[January 08, 2019, 05:31:52 AM]


Solid Works maker license 1 year Free!! by maelh
[January 04, 2019, 01:50:08 PM]


Merry Christmas by Protowrxs
[December 28, 2018, 11:44:25 PM]


Ultralite or flying car of sorts by Impala
[December 27, 2018, 09:30:02 PM]


Web TIme API - by Gareth
[December 07, 2018, 04:34:37 PM]


API Directory by Gareth
[December 06, 2018, 03:34:16 PM]


The Original Prusa I3 Mk3 by tinhead
[November 30, 2018, 02:49:52 PM]


Email notifications by CraigCox
[November 28, 2018, 10:26:06 PM]

* Recent Posts

Re: Fun Fact by Impala
[February 13, 2019, 11:05:01 PM]


Re: Animabot Rev3 - Advanced Hexapod Robot by Smashley
[February 05, 2019, 03:41:50 PM]


Re: MKS Gen L 1.0 by printergreg
[February 03, 2019, 12:41:10 PM]


Re: Finally tried out a Chinese PCB service by Bajdi
[February 02, 2019, 08:40:49 AM]


Finally tried out a Chinese PCB service by jscottb
[February 01, 2019, 11:26:19 AM]


Re: MKS Gen L 1.0 by jinx
[January 29, 2019, 07:31:47 AM]


Re: MKS Gen L 1.0 by printergreg
[January 26, 2019, 04:03:15 PM]


Re: MKS Gen L 1.0 by jimmyeao
[January 20, 2019, 12:15:32 PM]


Animabot Rev3 - Advanced Hexapod Robot by Nemesis
[January 17, 2019, 09:34:32 AM]


PLX-DAQ by BaldwinK
[January 16, 2019, 06:44:18 AM]


Re: Four Motor Leg Module by BaldwinK
[January 09, 2019, 04:55:14 PM]


Re: Android Adware by Diegotorry
[January 08, 2019, 05:34:48 AM]


Re: Hi, Mushroom glue here. by Diegotorry
[January 08, 2019, 05:31:52 AM]


Re: Solid Works maker license 1 year Free!! by maelh
[January 04, 2019, 01:50:08 PM]


Solid Works maker license 1 year Free!! by tinhead
[January 02, 2019, 06:15:07 AM]