collapse

Welcome!



Welcome to Robot Rebels, an online robot maker community.

Register today to post your projects, ask questions, share knowledge and meet like-minded people from around the world.


The RobotRebel.org Community

Author Topic: JX23 pan and tilt  (Read 1399 times)

jinx

  • calling from free Europe
  • Sr. Member
  • *****
  • Posts: 440
JX23 pan and tilt
« on: January 12, 2016, 06:46:32 AM »
         
jx23 web main.jpg
*jx23 web main.jpg (30.35 kB . 277x263 - viewed 155 times)
               JX-26 Pan&Tilt- multi purpose role and easy to construct the idea behind this pan and tilt   the parts where printed for use with standard size servo ' so far I used HS-422 and S03NF STD with a little sanding fits ok. with those  futaba s3003 on ebay for £3 each  just getting cheaper.

Overlord printing the parts:
the parts where printed at .22 layer with a shell thickness 1.2 mm took about 2 days to print,clean and build

 construction:
 THE BASE:
parts for this stage:
   4  screws M2x10     "for the base     
   4  Bolts  M3x12      " for the servo plate 
    servo and horn      "yours servo of choice
                     the base consumes the most plastic, with the supports.   it goes together like a burger with the servo sandwiched between the  plate and the base  , should be a tight fitting with the servo plate so  it  want  need  screwing in. with the plate bolted to the main body just screw the base and its done
 

THE TILT:
                Is even more straight forward  to construct you only need three parts to have it working the  the tilt head the servo mount and the PLUG!.
 I had to modify the servo at this point  'theirs a divider thingy near the  servo holes which has to be filed down to allow the servo fit properly again should be a  snug fit so no need to screw in the servo. the cable passes through the the body of the bracket that comes out through the base   
first test:
   




 the models stl files are in the vault: http://www.robotrebels.org/index.php?topic=367.0
 if the JX23 to big for you then check out  the  JX mini  parts design for 9g servo  http://www.robotrebels.org/index.php?topic=366.0


JX23 by I am jinx is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.



 
« Last Edit: January 12, 2016, 07:22:38 AM by jinx »
I build bots

 

* Search


* Recent Topics

Sloooow progress on the I3 clone by KingBeetle
[Today at 04:20:59 AM]


ESP32 - Stepper - LIDAR - Platform by jinx
[July 15, 2018, 04:58:51 AM]


MKS Gen L 1.0 by jinx
[July 15, 2018, 03:55:57 AM]


Motor rewinding machine by 1 what
[July 10, 2018, 06:03:46 PM]


All the stories in the forum are most important. by ZeroMax
[July 01, 2018, 09:44:53 PM]


Parallax CR Servo with Built-In Encoder by 1 what
[June 28, 2018, 12:13:32 PM]


He's Back...BoB V3.0 by k120189
[June 21, 2018, 07:03:17 PM]


Funding by MEgg
[June 21, 2018, 04:34:36 PM]


Robot Hive by jinx
[June 12, 2018, 03:58:03 AM]


Hi, Mushroom glue here. by Andrewsz
[June 11, 2018, 12:23:20 AM]


CZ-1 2.0: problems, calibration and printing, part2 by MEgg
[June 10, 2018, 06:10:53 AM]


Greetings! by Protowrxs
[June 05, 2018, 04:45:02 PM]


Raspberry Pi / Python eBook - free for the next 11 hours! by MEgg
[June 04, 2018, 05:21:07 PM]


All metal Titan Extruder by jinx
[May 27, 2018, 04:24:23 AM]


UConduit H-Bot printer design by KingBeetle
[May 26, 2018, 02:10:38 PM]

* Recent Posts

Re: Sloooow progress on the I3 clone by KingBeetle
[Today at 04:20:59 AM]


Re: Sloooow progress on the I3 clone by MEgg
[July 15, 2018, 08:44:53 AM]


Re: ESP32 - Stepper - LIDAR - Platform by jinx
[July 15, 2018, 04:58:51 AM]


Re: MKS Gen L 1.0 by jinx
[July 15, 2018, 03:55:57 AM]


Re: Sloooow progress on the I3 clone by jinx
[July 15, 2018, 03:46:18 AM]


Re: MKS Gen L 1.0 by KingBeetle
[July 14, 2018, 04:05:49 PM]


Re: Sloooow progress on the I3 clone by KingBeetle
[July 14, 2018, 11:13:35 AM]


Re: ESP32 - Stepper - LIDAR - Platform by 1 what
[July 14, 2018, 07:02:46 AM]


Re: Sloooow progress on the I3 clone by MEgg
[July 14, 2018, 05:38:34 AM]


Re: Sloooow progress on the I3 clone by KingBeetle
[July 14, 2018, 03:45:21 AM]


Re: ESP32 - Stepper - LIDAR - Platform by jinx
[July 14, 2018, 02:49:04 AM]


Re: ESP32 - Stepper - LIDAR - Platform by 1 what
[July 13, 2018, 10:03:12 PM]


Re: ESP32 - Stepper - LIDAR - Platform by Gareth
[July 13, 2018, 04:19:01 PM]


Re: ESP32 - Stepper - LIDAR - Platform by jinx
[July 13, 2018, 01:33:15 PM]


ESP32 - Stepper - LIDAR - Platform by Gareth
[July 13, 2018, 04:28:46 AM]