collapse

Welcome!



Welcome to Robot Rebels, an online robot maker community.

Register today to post your projects, ask questions, share knowledge and meet like-minded people from around the world.


The RobotRebel.org Community

Author Topic: JX23 pan and tilt  (Read 940 times)

jinx

  • calling from free Europe
  • Sr. Member
  • *****
  • Posts: 382
JX23 pan and tilt
« on: January 12, 2016, 06:46:32 AM »
         
jx23 web main.jpg
*jx23 web main.jpg (30.35 kB . 277x263 - viewed 106 times)
               JX-26 Pan&Tilt- multi purpose role and easy to construct the idea behind this pan and tilt   the parts where printed for use with standard size servo ' so far I used HS-422 and S03NF STD with a little sanding fits ok. with those  futaba s3003 on ebay for £3 each  just getting cheaper.

Overlord printing the parts:
the parts where printed at .22 layer with a shell thickness 1.2 mm took about 2 days to print,clean and build

 construction:
 THE BASE:
parts for this stage:
   4  screws M2x10     "for the base     
   4  Bolts  M3x12      " for the servo plate 
    servo and horn      "yours servo of choice
                     the base consumes the most plastic, with the supports.   it goes together like a burger with the servo sandwiched between the  plate and the base  , should be a tight fitting with the servo plate so  it  want  need  screwing in. with the plate bolted to the main body just screw the base and its done
 

THE TILT:
                Is even more straight forward  to construct you only need three parts to have it working the  the tilt head the servo mount and the PLUG!.
 I had to modify the servo at this point  'theirs a divider thingy near the  servo holes which has to be filed down to allow the servo fit properly again should be a  snug fit so no need to screw in the servo. the cable passes through the the body of the bracket that comes out through the base   
first test:
   




 the models stl files are in the vault: http://www.robotrebels.org/index.php?topic=367.0
 if the JX23 to big for you then check out  the  JX mini  parts design for 9g servo  http://www.robotrebels.org/index.php?topic=366.0


JX23 by I am jinx is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.



 
« Last Edit: January 12, 2016, 07:22:38 AM by jinx »
I build bots

 

* Search


* Recent Topics

3Dimsen by Bajdi
[Today at 05:42:36 AM]


Antique (fun) stuff by MEgg
[September 23, 2017, 09:26:34 AM]


win a smoothie board by jinx
[September 21, 2017, 02:21:45 AM]


Parallax CR Servo with Built-In Encoder by erco
[September 19, 2017, 10:50:01 PM]


Re-writing robotics by MEgg
[September 17, 2017, 06:01:03 AM]


Saturn pics anyone by ossipee
[September 16, 2017, 05:46:24 PM]


Kitronik :MOVE mini buggy kit by craighissett
[September 14, 2017, 08:12:20 PM]


Third 3D printer recommentation by Deity
[September 14, 2017, 06:43:00 AM]


Android Adware by Impala
[September 13, 2017, 03:24:01 PM]


Plantoid Robot's on Kickstarter. by ossipee
[September 09, 2017, 04:29:54 PM]


rewound PLA filament by jinx
[September 03, 2017, 10:30:51 AM]


corexy test by jinx
[September 02, 2017, 05:30:46 AM]


RR terms by MEgg
[August 27, 2017, 08:29:04 AM]


Eclipse 2017 by Impala
[August 24, 2017, 08:14:44 PM]


PCB mill by jinx
[August 21, 2017, 04:01:57 PM]

* Recent Posts

Re: 3Dimsen by Bajdi
[Today at 05:42:36 AM]


Re: 3Dimsen by Deity
[September 25, 2017, 07:49:30 AM]


Antique (fun) stuff by MEgg
[September 23, 2017, 09:26:34 AM]


3Dimsen by mogul
[September 23, 2017, 08:59:05 AM]


win a smoothie board by jinx
[September 21, 2017, 02:21:45 AM]


Parallax CR Servo with Built-In Encoder by erco
[September 19, 2017, 10:50:01 PM]


Re: Re-writing robotics by MEgg
[September 17, 2017, 06:01:03 AM]


Saturn pics anyone by ossipee
[September 16, 2017, 05:46:24 PM]


Re: Re-writing robotics by mogul
[September 16, 2017, 04:32:44 PM]


Re: Re-writing robotics by GayatoYana
[September 16, 2017, 02:26:52 AM]


Kitronik :MOVE mini buggy kit by craighissett
[September 14, 2017, 08:12:20 PM]


Re: Third 3D printer recommentation by Deity
[September 14, 2017, 06:43:00 AM]


Re: Third 3D printer recommentation by tinhead
[September 14, 2017, 01:46:57 AM]


Android Adware by Impala
[September 13, 2017, 03:24:01 PM]


Re: Third 3D printer recommentation by Deity
[September 13, 2017, 11:20:20 AM]