collapse

Welcome!



Welcome to Robot Rebels, an online robot maker community.

Register today to post your projects, ask questions, share knowledge and meet like-minded people from around the world.


The RobotRebel.org Community

Author Topic: Cross slide vice  (Read 562 times)

jinx

  • calling from free Europe
  • Sr. Member
  • *****
  • Posts: 440
Cross slide vice
« on: July 28, 2017, 03:26:57 PM »


    In preparation for my adventures with metal working I got myself a cross slide vice of ebay  for £20 "yeap you can be to cheap to say this thing is a rough factory second would be an understatement. from the un boxing it was clear there was no love for it from the sender! no secure packaging here.

       
   
      Just no finishing to it and a bit of oil,  had to tear it clean and sand few spaces add a little grease on the threaded appears a little binding on  on the clamp itself but still usable.
     

     4" to big for my bench drill should be looking at 3" but am sure I make it fit for what I need. to be honest £20 was just to cheap!.
 
    sat on the drill bench,





     

     

« Last Edit: July 29, 2017, 03:34:09 PM by jinx »
I build bots

danphobic_

  • Member
  • *
  • Posts: 48
  • personal text?
Re: Cross slide vice
« Reply #1 on: July 29, 2017, 10:10:11 AM »
That's a pretty nice bit of kit!!

 

* Search


* Recent Topics

Sloooow progress on the I3 clone by KingBeetle
[July 16, 2018, 04:20:59 AM]


ESP32 - Stepper - LIDAR - Platform by jinx
[July 15, 2018, 04:58:51 AM]


MKS Gen L 1.0 by jinx
[July 15, 2018, 03:55:57 AM]


Motor rewinding machine by 1 what
[July 10, 2018, 06:03:46 PM]


All the stories in the forum are most important. by ZeroMax
[July 01, 2018, 09:44:53 PM]


Parallax CR Servo with Built-In Encoder by 1 what
[June 28, 2018, 12:13:32 PM]


He's Back...BoB V3.0 by k120189
[June 21, 2018, 07:03:17 PM]


Funding by MEgg
[June 21, 2018, 04:34:36 PM]


Robot Hive by jinx
[June 12, 2018, 03:58:03 AM]


Hi, Mushroom glue here. by Andrewsz
[June 11, 2018, 12:23:20 AM]


CZ-1 2.0: problems, calibration and printing, part2 by MEgg
[June 10, 2018, 06:10:53 AM]


Greetings! by Protowrxs
[June 05, 2018, 04:45:02 PM]


Raspberry Pi / Python eBook - free for the next 11 hours! by MEgg
[June 04, 2018, 05:21:07 PM]


All metal Titan Extruder by jinx
[May 27, 2018, 04:24:23 AM]


UConduit H-Bot printer design by KingBeetle
[May 26, 2018, 02:10:38 PM]

* Recent Posts

Re: Sloooow progress on the I3 clone by KingBeetle
[July 16, 2018, 04:20:59 AM]


Re: Sloooow progress on the I3 clone by MEgg
[July 15, 2018, 08:44:53 AM]


Re: ESP32 - Stepper - LIDAR - Platform by jinx
[July 15, 2018, 04:58:51 AM]


Re: MKS Gen L 1.0 by jinx
[July 15, 2018, 03:55:57 AM]


Re: Sloooow progress on the I3 clone by jinx
[July 15, 2018, 03:46:18 AM]


Re: MKS Gen L 1.0 by KingBeetle
[July 14, 2018, 04:05:49 PM]


Re: Sloooow progress on the I3 clone by KingBeetle
[July 14, 2018, 11:13:35 AM]


Re: ESP32 - Stepper - LIDAR - Platform by 1 what
[July 14, 2018, 07:02:46 AM]


Re: Sloooow progress on the I3 clone by MEgg
[July 14, 2018, 05:38:34 AM]


Re: Sloooow progress on the I3 clone by KingBeetle
[July 14, 2018, 03:45:21 AM]


Re: ESP32 - Stepper - LIDAR - Platform by jinx
[July 14, 2018, 02:49:04 AM]


Re: ESP32 - Stepper - LIDAR - Platform by 1 what
[July 13, 2018, 10:03:12 PM]


Re: ESP32 - Stepper - LIDAR - Platform by Gareth
[July 13, 2018, 04:19:01 PM]


Re: ESP32 - Stepper - LIDAR - Platform by jinx
[July 13, 2018, 01:33:15 PM]


ESP32 - Stepper - LIDAR - Platform by Gareth
[July 13, 2018, 04:28:46 AM]