collapse

Welcome!



Welcome to Robot Rebels, an online robot maker community.

Register today to post your projects, ask questions, share knowledge and meet like-minded people from around the world.


The RobotRebel.org Community

Author Topic: all metal hotend  (Read 837 times)

jinx

  • calling from free Europe
  • Sr. Member
  • *****
  • Posts: 440
all metal hotend
« on: July 21, 2017, 10:57:22 AM »
came across this bargain for a volcano clone, at that price its worth it just for the nozzles .2 to 1.2 thats a lot of experimenting  but if the .2 works you got a fine lego block. to be honest between the v6 and the volcano clones the volcano prints better.... i let you know in a month
https://www.aliexpress.com/item/3D-Printer-12V-24V-Volcano-Nozzle-Simple-replacement-kit-J-head-Hotend-for-0-4mm-1/32788527717.html?spm=2114.search0104.3.135.0nHFsY&ws_ab_test=searchweb0_0,searchweb201602_5_10152_10065_10151_10068_10130_10209_10192_10190_10308_10301_10137_10303_10060_10155_438_10154_10056_10055_10054_10059_100031_10099_10103_10102_10052_10053_10142_10107_10050_10051_10084_10083_10080_10082_10081_10110_10111_10112_10113_10114_10179_10182_10184_10078_10079_10210_10073_5360020,searchweb201603_16,ppcSwitch_3&btsid=4f05552a-08ca-4012-83a4-eeeed15f66ee&algo_expid=c35be251-4b60-480e-8183-7d2659547db7-17&algo_pvid=c35be251-4b60-480e-8183-7d2659547db7

thermistor

https://www.aliexpress.com/item/1pc-M3-screw-on-SEMITEC-104NT-4-R025H42G-Instead-104GT-2-Thermistor-100K-modular-for-3d/32808928431.html?spm=2114.search0104.3.340.uYwZOe&ws_ab_test=searchweb0_0,searchweb201602_5_10152_10065_10151_10068_10130_10209_10192_10190_10308_10301_10137_10303_10060_10155_438_10154_10056_10055_10054_10059_100031_10099_10103_10102_10052_10053_10142_10107_10050_10051_10084_10083_10080_10082_10081_10110_10111_10112_10113_10114_10179_10182_10184_10078_10079_10210_10073_5360020,searchweb201603_16,ppcSwitch_3&btsid=d7da04b5-1860-43c2-a12a-b8f795b10ef6&algo_expid=ec05ce2c-64e4-46d4-bae8-caa1c1b98b59-25&algo_pvid=ec05ce2c-64e4-46d4-bae8-caa1c1b98b59


now i like this not keen n the price wait for it !!
https://www.aliexpress.com/item/A-Funssor-Reprap-Prusa-i3-Chimera-Cyclops-Bowden-X-carriage-mount-hotend-kit-Inductive-Sensor-Auto/32816941615.html?spm=2114.search0104.3.190.Oa9vIj&ws_ab_test=searchweb0_0,searchweb201602_5_10152_10065_10151_10068_10130_10209_10192_10190_10308_10301_10137_10303_10060_10155_438_10154_10056_10055_10054_10059_100031_10099_10103_10102_10052_10053_10142_10107_10050_10051_10084_10083_10080_10082_10081_10110_10111_10112_10113_10114_10179_10182_10184_10078_10079_10210_10073_5360020,searchweb201603_16,ppcSwitch_3&btsid=0a5f426b-ecff-4fb5-ac31-264473bcd7f2&algo_expid=1fad8a67-3569-485c-82fa-192b07183050-25&algo_pvid=1fad8a67-3569-485c-82fa-192b07183050

 
« Last Edit: July 21, 2017, 11:21:24 AM by jinx »
I build bots

Bajdi

  • Member
  • *
  • B
  • Posts: 75
Re: all metal hotend
« Reply #1 on: August 17, 2017, 07:41:20 AM »
Hmm the volcano prints better then the V6? Care to elaborate?
You know I'm very happy with my genuine E3D V6, has never failed me. Never had a blocked heatbreak or nozzle.

jinx

  • calling from free Europe
  • Sr. Member
  • *****
  • Posts: 440
Re: all metal hotend
« Reply #2 on: August 18, 2017, 06:08:36 AM »
"genuine E3D V6, has never failed me".
 and it never will I suspect... In the world of clones the .4 nozzle given me a smoother cleaner finish with top surface  " think in part because of the more flat on the nozzle than a v6.
    you mention jams!!! in the heatbreak  >:D with the volcano it come with those dreaded all metal heatbreak  apart from the end into the heater block there a small piece of teflon, but these heatbreaks jam all time unless you  do a DIY polish job thou with the volcano just aint a problem unlike with the v6 counterpart block. " they worked fine on both I have. "now with a range of nozzles from .25 to 1.2 a bonus in the clone world.

  "But you know bajdi we shouldn't go comparing clones to genuine only upset some folks!  "quality control doesn't exist either you could make up a nice looking hotend by chance, thou even the ugly fkers still work.. nice hotend linked above am in the process of taming, but am diverted  by  print surface... now cave overhaul in progress so sry  for delay in reply bud.   

   
I build bots

 

* Search


* Recent Topics

Sloooow progress on the I3 clone by KingBeetle
[July 16, 2018, 04:20:59 AM]


ESP32 - Stepper - LIDAR - Platform by jinx
[July 15, 2018, 04:58:51 AM]


MKS Gen L 1.0 by jinx
[July 15, 2018, 03:55:57 AM]


Motor rewinding machine by 1 what
[July 10, 2018, 06:03:46 PM]


All the stories in the forum are most important. by ZeroMax
[July 01, 2018, 09:44:53 PM]


Parallax CR Servo with Built-In Encoder by 1 what
[June 28, 2018, 12:13:32 PM]


He's Back...BoB V3.0 by k120189
[June 21, 2018, 07:03:17 PM]


Funding by MEgg
[June 21, 2018, 04:34:36 PM]


Robot Hive by jinx
[June 12, 2018, 03:58:03 AM]


Hi, Mushroom glue here. by Andrewsz
[June 11, 2018, 12:23:20 AM]


CZ-1 2.0: problems, calibration and printing, part2 by MEgg
[June 10, 2018, 06:10:53 AM]


Greetings! by Protowrxs
[June 05, 2018, 04:45:02 PM]


Raspberry Pi / Python eBook - free for the next 11 hours! by MEgg
[June 04, 2018, 05:21:07 PM]


All metal Titan Extruder by jinx
[May 27, 2018, 04:24:23 AM]


UConduit H-Bot printer design by KingBeetle
[May 26, 2018, 02:10:38 PM]

* Recent Posts

Re: Sloooow progress on the I3 clone by KingBeetle
[July 16, 2018, 04:20:59 AM]


Re: Sloooow progress on the I3 clone by MEgg
[July 15, 2018, 08:44:53 AM]


Re: ESP32 - Stepper - LIDAR - Platform by jinx
[July 15, 2018, 04:58:51 AM]


Re: MKS Gen L 1.0 by jinx
[July 15, 2018, 03:55:57 AM]


Re: Sloooow progress on the I3 clone by jinx
[July 15, 2018, 03:46:18 AM]


Re: MKS Gen L 1.0 by KingBeetle
[July 14, 2018, 04:05:49 PM]


Re: Sloooow progress on the I3 clone by KingBeetle
[July 14, 2018, 11:13:35 AM]


Re: ESP32 - Stepper - LIDAR - Platform by 1 what
[July 14, 2018, 07:02:46 AM]


Re: Sloooow progress on the I3 clone by MEgg
[July 14, 2018, 05:38:34 AM]


Re: Sloooow progress on the I3 clone by KingBeetle
[July 14, 2018, 03:45:21 AM]


Re: ESP32 - Stepper - LIDAR - Platform by jinx
[July 14, 2018, 02:49:04 AM]


Re: ESP32 - Stepper - LIDAR - Platform by 1 what
[July 13, 2018, 10:03:12 PM]


Re: ESP32 - Stepper - LIDAR - Platform by Gareth
[July 13, 2018, 04:19:01 PM]


Re: ESP32 - Stepper - LIDAR - Platform by jinx
[July 13, 2018, 01:33:15 PM]


ESP32 - Stepper - LIDAR - Platform by Gareth
[July 13, 2018, 04:28:46 AM]