collapse

Welcome!



Welcome to Robot Rebels, an online robot maker community.

Register today to post your projects, ask questions, share knowledge and meet like-minded people from around the world.


The RobotRebel.org Community

Author Topic: JX23 pan and tilt  (Read 1365 times)

jinx

  • calling from free Europe
  • Sr. Member
  • *****
  • Posts: 435
JX23 pan and tilt
« on: January 12, 2016, 06:46:32 AM »
         
jx23 web main.jpg
*jx23 web main.jpg (30.35 kB . 277x263 - viewed 147 times)
               JX-26 Pan&Tilt- multi purpose role and easy to construct the idea behind this pan and tilt   the parts where printed for use with standard size servo ' so far I used HS-422 and S03NF STD with a little sanding fits ok. with those  futaba s3003 on ebay for £3 each  just getting cheaper.

Overlord printing the parts:
the parts where printed at .22 layer with a shell thickness 1.2 mm took about 2 days to print,clean and build

 construction:
 THE BASE:
parts for this stage:
   4  screws M2x10     "for the base     
   4  Bolts  M3x12      " for the servo plate 
    servo and horn      "yours servo of choice
                     the base consumes the most plastic, with the supports.   it goes together like a burger with the servo sandwiched between the  plate and the base  , should be a tight fitting with the servo plate so  it  want  need  screwing in. with the plate bolted to the main body just screw the base and its done
 

THE TILT:
                Is even more straight forward  to construct you only need three parts to have it working the  the tilt head the servo mount and the PLUG!.
 I had to modify the servo at this point  'theirs a divider thingy near the  servo holes which has to be filed down to allow the servo fit properly again should be a  snug fit so no need to screw in the servo. the cable passes through the the body of the bracket that comes out through the base   
first test:
   




 the models stl files are in the vault: http://www.robotrebels.org/index.php?topic=367.0
 if the JX23 to big for you then check out  the  JX mini  parts design for 9g servo  http://www.robotrebels.org/index.php?topic=366.0


JX23 by I am jinx is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.



 
« Last Edit: January 12, 2016, 07:22:38 AM by jinx »
I build bots

 

* Search


* Recent Topics

Sloooow progress on the I3 clone by KingBeetle
[Today at 04:38:36 AM]


MKS Gen L 1.0 by MEgg
[June 18, 2018, 02:59:16 PM]


He's Back...BoB V3.0 by Bajdi
[June 18, 2018, 08:00:17 AM]


Robot Hive by jinx
[June 12, 2018, 03:58:03 AM]


Hi, Mushroom glue here. by Andrewsz
[June 11, 2018, 12:23:20 AM]


CZ-1 2.0: problems, calibration and printing, part2 by MEgg
[June 10, 2018, 06:10:53 AM]


Greetings! by Protowrxs
[June 05, 2018, 04:45:02 PM]


Raspberry Pi / Python eBook - free for the next 11 hours! by MEgg
[June 04, 2018, 05:21:07 PM]


All metal Titan Extruder by jinx
[May 27, 2018, 04:24:23 AM]


UConduit H-Bot printer design by KingBeetle
[May 26, 2018, 02:10:38 PM]


Hello Robot Rebels by jinx
[May 23, 2018, 04:40:15 PM]


Cardboard Bob by Pouserz
[May 23, 2018, 07:04:41 AM]


ChuckCrunch by Gareth
[May 23, 2018, 02:51:44 AM]


Sloth Robot=Bob by erco
[May 16, 2018, 02:17:07 PM]


URF to ERF by jinx
[May 07, 2018, 03:48:47 AM]

* Recent Posts

Re: Sloooow progress on the I3 clone by KingBeetle
[Today at 04:38:36 AM]


Re: MKS Gen L 1.0 by MEgg
[June 18, 2018, 02:59:16 PM]


Re: He's Back...BoB V3.0 by Bajdi
[June 18, 2018, 08:00:17 AM]


Re: MKS Gen L 1.0 by jinx
[June 18, 2018, 04:10:01 AM]


He's Back...BoB V3.0 by k120189
[June 17, 2018, 04:12:07 PM]


Re: MKS Gen L 1.0 by BobP
[June 16, 2018, 11:56:11 PM]


Re: Sloooow progress on the I3 clone by KingBeetle
[June 13, 2018, 12:37:14 AM]


Re: Sloooow progress on the I3 clone by jinx
[June 12, 2018, 05:24:47 AM]


Re: MKS Gen L 1.0 by jinx
[June 12, 2018, 04:32:40 AM]


Re: Robot Hive by jinx
[June 12, 2018, 03:58:03 AM]


Re: Sloooow progress on the I3 clone by KingBeetle
[June 12, 2018, 03:39:37 AM]


Re: MKS Gen L 1.0 by BobP
[June 11, 2018, 09:38:18 PM]


Re: Robot Hive by KingBeetle
[June 11, 2018, 12:38:24 AM]


Re: Robot Hive by Andrewsz
[June 11, 2018, 12:24:30 AM]


Re: Hi, Mushroom glue here. by Andrewsz
[June 11, 2018, 12:23:20 AM]