collapse

Welcome!



Welcome to Robot Rebels, an online robot maker community.

Register today to post your projects, ask questions, share knowledge and meet like-minded people from around the world.


The RobotRebel.org Community

Author Topic: My scope focuser upgrade  (Read 213 times)

jscottb

  • Member
  • *
  • j
  • Posts: 44
    • randomcoderblog
My scope focuser upgrade
« on: October 05, 2017, 06:53:55 PM »
I know a few here like visual astronomy as well as bots and 3d printing so here is my latest scope project.

It's the beginnings of a simple 2"/1.25" crayford style focuser. I also wanted a very low profile focuser that I could add or take rack length away at night during use. This is very useful with many larger mm ep's, 20mm and above.

It will be in four parts; The tube mount, the base, 2" focus rack and 1.25" ep adapter.

There will be one bearing on the base and one roller on the knob assembly with rubber o-rings to move the rack up and down and keep presser on it. I may opt to use some teflon in the tube and rack for smoother movement. I may just smooth sand the tube and rack and test the movement first.  Still a lot of holes and work to add :)

Here are a few images and a test print of the base.

Screen Shot 2017-10-05 at 6.21.03 PM.png
*Screen Shot 2017-10-05 at 6.21.03 PM.png (122.09 kB . 454x396 - viewed 38 times)
Screen Shot 2017-10-05 at 6.25.40 PM.png
*Screen Shot 2017-10-05 at 6.25.40 PM.png (96 kB . 402x390 - viewed 36 times)
20171005_182728.jpg
*20171005_182728.jpg (362.99 kB . 481x411 - viewed 39 times)
« Last Edit: October 05, 2017, 08:01:58 PM by jscottb »

jscottb

  • Member
  • *
  • j
  • Posts: 44
    • randomcoderblog
Re: My scope focuser upgrade
« Reply #1 on: October 05, 2017, 10:37:05 PM »
I have mad it a bit more organic.



Looking next into tensioning points for the shafts and may use two bearings for more points of contact, but will try with one first. 
« Last Edit: October 05, 2017, 10:47:32 PM by jscottb »

jinx

  • calling from free Europe
  • Sr. Member
  • *****
  • Posts: 384
Re: My scope focuser upgrade
« Reply #2 on: October 06, 2017, 05:00:15 AM »
fine looking start Js, you using a roller for adjustment rather than a rack and pinion? just wondering where you lock it in place.
I build bots

jscottb

  • Member
  • *
  • j
  • Posts: 44
    • randomcoderblog
Re: My scope focuser upgrade
« Reply #3 on: October 06, 2017, 07:47:22 AM »
Thanks Jinx.

Usually you have some sort of tensioner on the knob assembly and roller. That;s what I am sorting out now.
 

jscottb

  • Member
  • *
  • j
  • Posts: 44
    • randomcoderblog
Re: My scope focuser upgrade
« Reply #4 on: October 07, 2017, 07:57:43 PM »
Well, my plans have changed... The "person" I won the 6" scope from was a twerp and wanted 140$US more for shipping after waiting four full days with no communication  >:(

I found  a dealer with new 130mm Orion optics in a bad shipped scope. Says the optics are unharmed and are under warrantee for 60days. This is what I wanted to do kind of anyway, but new good optics where more costly than the other scope. It will come with other parts as well.

I plan to print a mirror cell (if needed) a box and a focuser/secondary mount and truss the two together with aluminum L beams or square tubing.

Here is a first draft of the focuser and spider asm. It will probably change after I get the optics in. I am thinking about splitting the part in half with the focuser mount on one side and the non-focuser side on the other. Have screw joint to put them together. Unsure for now.

 

 

* Search


* Recent Topics

Kossel Build by Deity
[October 20, 2017, 11:23:27 AM]


Drawdio by Yahmez
[October 18, 2017, 10:50:49 AM]


PI tray by jinx
[October 14, 2017, 07:19:30 AM]


24byj48 based delta robot - fail by mogul
[October 08, 2017, 02:24:55 AM]


My scope focuser upgrade by jscottb
[October 07, 2017, 07:57:43 PM]


3Dimsen by viswesh
[September 26, 2017, 01:17:04 PM]


Antique (fun) stuff by MEgg
[September 23, 2017, 09:26:34 AM]


win a smoothie board by jinx
[September 21, 2017, 02:21:45 AM]


Parallax CR Servo with Built-In Encoder by erco
[September 19, 2017, 10:50:01 PM]


Re-writing robotics by MEgg
[September 17, 2017, 06:01:03 AM]


Saturn pics anyone by ossipee
[September 16, 2017, 05:46:24 PM]


Kitronik :MOVE mini buggy kit by craighissett
[September 14, 2017, 08:12:20 PM]


Third 3D printer recommentation by Deity
[September 14, 2017, 06:43:00 AM]


Android Adware by Impala
[September 13, 2017, 03:24:01 PM]


Plantoid Robot's on Kickstarter. by ossipee
[September 09, 2017, 04:29:54 PM]

* Recent Posts

Re: Kossel Build by Deity
[October 20, 2017, 11:23:27 AM]


Re: Kossel Build by Yahmez
[October 20, 2017, 11:10:43 AM]


Re: Kossel Build by Deity
[October 20, 2017, 05:50:25 AM]


Re: Kossel Build by Yahmez
[October 18, 2017, 12:40:43 PM]


Re: Kossel Build by Deity
[October 18, 2017, 11:59:22 AM]


Re: Kossel Build by Yahmez
[October 18, 2017, 11:24:50 AM]


Re: Kossel Build by Deity
[October 18, 2017, 11:12:07 AM]


Drawdio by Yahmez
[October 18, 2017, 10:50:49 AM]


Re: Kossel Build by Yahmez
[October 18, 2017, 10:00:11 AM]


Re: Kossel Build by Yahmez
[October 18, 2017, 09:51:25 AM]


PI tray by jinx
[October 14, 2017, 07:19:30 AM]


24byj48 based delta robot - fail by mogul
[October 08, 2017, 02:24:55 AM]


Re: My scope focuser upgrade by jscottb
[October 07, 2017, 07:57:43 PM]


Re: My scope focuser upgrade by jscottb
[October 06, 2017, 07:47:22 AM]


Re: My scope focuser upgrade by jinx
[October 06, 2017, 05:00:15 AM]