collapse

Welcome!



Welcome to Robot Rebels, an online robot maker community.

Register today to post your projects, ask questions, share knowledge and meet like-minded people from around the world.


The RobotRebel.org Community

Author Topic: PCB mill  (Read 1042 times)

ossipee

  • Member
  • *
  • o
  • Posts: 83
PCB mill
« on: August 17, 2017, 06:09:13 PM »

MEgg

  • Sr. Member
  • *
  • Posts: 251
Re: PCB mill
« Reply #1 on: August 20, 2017, 08:36:53 AM »
Are these cheap mills good ones?
1st project: Dagu 5 Rover + Dagu - 4 Channel DC Motor + Red Back Spider robot controller + Raspberry B+
Chassis + wheels: https://picload.org/image/dggroior/20150831_028.jpg
current: https://www.keepandshare.com/userpics/m/a/r/k/usegg/2016-04/sb/img_3480-79682018.jpg

jinx

  • calling from free Europe
  • Sr. Member
  • *****
  • Posts: 440
Re: PCB mill
« Reply #2 on: August 20, 2017, 02:23:55 PM »
no there cheap, but least you have fun learning grbl with it, its an open source project
 snatch & cobbled together.
   will you endup swapping  spindles for sure which is almost half the price for $100 to step up, you could build a better starting with 10 mm rods "12 be rock solid". regardless of distance we know because TH tried 8 mm bars

 thou i like/prefer this one

change in lead screws:
not a bad looking circuit
« Last Edit: August 20, 2017, 02:36:54 PM by jinx »
I build bots

jinx

  • calling from free Europe
  • Sr. Member
  • *****
  • Posts: 440
Re: PCB mill
« Reply #3 on: August 21, 2017, 04:01:57 PM »
I build bots

 

* Search


* Recent Topics

Sloooow progress on the I3 clone by KingBeetle
[July 16, 2018, 04:20:59 AM]


ESP32 - Stepper - LIDAR - Platform by jinx
[July 15, 2018, 04:58:51 AM]


MKS Gen L 1.0 by jinx
[July 15, 2018, 03:55:57 AM]


Motor rewinding machine by 1 what
[July 10, 2018, 06:03:46 PM]


All the stories in the forum are most important. by ZeroMax
[July 01, 2018, 09:44:53 PM]


Parallax CR Servo with Built-In Encoder by 1 what
[June 28, 2018, 12:13:32 PM]


He's Back...BoB V3.0 by k120189
[June 21, 2018, 07:03:17 PM]


Funding by MEgg
[June 21, 2018, 04:34:36 PM]


Robot Hive by jinx
[June 12, 2018, 03:58:03 AM]


Hi, Mushroom glue here. by Andrewsz
[June 11, 2018, 12:23:20 AM]


CZ-1 2.0: problems, calibration and printing, part2 by MEgg
[June 10, 2018, 06:10:53 AM]


Greetings! by Protowrxs
[June 05, 2018, 04:45:02 PM]


Raspberry Pi / Python eBook - free for the next 11 hours! by MEgg
[June 04, 2018, 05:21:07 PM]


All metal Titan Extruder by jinx
[May 27, 2018, 04:24:23 AM]


UConduit H-Bot printer design by KingBeetle
[May 26, 2018, 02:10:38 PM]

* Recent Posts

Re: Sloooow progress on the I3 clone by KingBeetle
[July 16, 2018, 04:20:59 AM]


Re: Sloooow progress on the I3 clone by MEgg
[July 15, 2018, 08:44:53 AM]


Re: ESP32 - Stepper - LIDAR - Platform by jinx
[July 15, 2018, 04:58:51 AM]


Re: MKS Gen L 1.0 by jinx
[July 15, 2018, 03:55:57 AM]


Re: Sloooow progress on the I3 clone by jinx
[July 15, 2018, 03:46:18 AM]


Re: MKS Gen L 1.0 by KingBeetle
[July 14, 2018, 04:05:49 PM]


Re: Sloooow progress on the I3 clone by KingBeetle
[July 14, 2018, 11:13:35 AM]


Re: ESP32 - Stepper - LIDAR - Platform by 1 what
[July 14, 2018, 07:02:46 AM]


Re: Sloooow progress on the I3 clone by MEgg
[July 14, 2018, 05:38:34 AM]


Re: Sloooow progress on the I3 clone by KingBeetle
[July 14, 2018, 03:45:21 AM]


Re: ESP32 - Stepper - LIDAR - Platform by jinx
[July 14, 2018, 02:49:04 AM]


Re: ESP32 - Stepper - LIDAR - Platform by 1 what
[July 13, 2018, 10:03:12 PM]


Re: ESP32 - Stepper - LIDAR - Platform by Gareth
[July 13, 2018, 04:19:01 PM]


Re: ESP32 - Stepper - LIDAR - Platform by jinx
[July 13, 2018, 01:33:15 PM]


ESP32 - Stepper - LIDAR - Platform by Gareth
[July 13, 2018, 04:28:46 AM]