collapse

Welcome!



Welcome to Robot Rebels, an online robot maker community.

Register today to post your projects, ask questions, share knowledge and meet like-minded people from around the world.


The RobotRebel.org Community

Author Topic: How would you power this thing?  (Read 4601 times)

Ttailspin

  • Member
  • *
  • T
  • Posts: 29
How would you power this thing?
« on: September 30, 2015, 10:44:25 AM »
A simple drawing of the start of a simple waterborne Robot platform.
Plastic one Liter bottles carry a surprising amount of weight in the water, and being 'Catamaran' it is very stable. 
It's missing some pieces though, like a rudder, and something to move it through the water, 
High speed Propellers, or maybe a Sail, a Jet pump perhaps, Or my favorite, Paddle wheels...

How would you power this thing?


-Tommy

Yahmez

  • Sr. Member
  • *****
  • Posts: 270
Re: How would you power this thing?
« Reply #1 on: September 30, 2015, 11:04:52 AM »
I would be tempted to use a screw drive. That would allow for amphibious use.
https://en.wikipedia.org/wiki/Screw-propelled_vehicle

deshipu

  • Member
  • *
  • Posts: 113
  • Radomir Dopieralski
    • Homepage
Re: How would you power this thing?
« Reply #2 on: September 30, 2015, 01:05:50 PM »
Magneto-hydro-dynamic drive!

ossipee

  • Member
  • *
  • o
  • Posts: 83
Re: How would you power this thing?
« Reply #3 on: September 30, 2015, 04:12:15 PM »
My last tugboat had Zpellers, could point the props in any direction, super manoeuvrable. Similar to this

ossipee

  • Member
  • *
  • o
  • Posts: 83
Re: How would you power this thing?
« Reply #4 on: September 30, 2015, 04:49:54 PM »
not z-pellers but looks cheap and fun link goes to banggood
http://tinyurl.com/nkdookd

erco

  • Member
  • *
  • e
  • Posts: 202
Re: How would you power this thing?
« Reply #5 on: September 30, 2015, 10:49:38 PM »
I'd use a pair of oscillating rudders for differential wave drive, but that's just me. I'm a huge rudder fan.

Ttailspin

  • Member
  • *
  • T
  • Posts: 29
Re: How would you power this thing?
« Reply #6 on: October 01, 2015, 01:26:00 AM »
I can see it now...
« Last Edit: October 01, 2015, 01:29:09 AM by Ttailspin »

Yahmez

  • Sr. Member
  • *****
  • Posts: 270
Re: How would you power this thing?
« Reply #7 on: October 16, 2015, 07:55:30 PM »
I can see it now...

 ;D I just got this... Heh I'm a bit slow.

ZeroMax

  • Badass when not suffering from IBS
  • Member
  • *
  • Posts: 115
  • Do you want ants? Because that's how you get ants.
    • DON'T LOOK AT MY ART!
Re: How would you power this thing?
« Reply #8 on: October 17, 2015, 11:17:50 PM »
I hope I'm not missing some joke here.  Didn't G have a screw drive for snow with catamaran liter bottles
DROP * FROM* WHERE 1=1
SUDO RM /DEV/

mogul

  • Hot glue gunslinger
  • Member
  • *
  • Posts: 151
  • This is a good day!
Re: How would you power this thing?
« Reply #9 on: October 18, 2015, 01:32:30 AM »
How would you power this thing?

Diet coke and mentos.

Yahmez

  • Sr. Member
  • *****
  • Posts: 270
Re: How would you power this thing?
« Reply #10 on: October 18, 2015, 03:37:50 PM »
How would you power this thing?

Diet coke and mentos.

This is by far the best suggestion yet. Then you can just use a single servo to steer it. :D

Yahmez

  • Sr. Member
  • *****
  • Posts: 270
Re: How would you power this thing?
« Reply #11 on: October 18, 2015, 03:40:37 PM »
I hope I'm not missing some joke here.  Didn't G have a screw drive for snow with catamaran liter bottles
That was my suggestion.

Ttailspin

  • Member
  • *
  • T
  • Posts: 29
Re: How would you power this thing?
« Reply #12 on: October 19, 2015, 02:12:18 AM »
No, your'e not missing the joke, I am always serious...always..seriously... :P

Mentos and Coke is just the kind of free thinking we should be looking for. i think..
Though my Koi fish may not like the idea so much, Kinda fogs up the water.
Unprotected propellers are another complaint my Koi fish have when I am experimenting with Waterborne Robots.
Along with any electrical current flowing thru the water, Makes em' swim funny.
Oh, and they also act a little weird with PING((( sensors pointed at their heads too...
seriously. 8)


-Tommy

mogul

  • Hot glue gunslinger
  • Member
  • *
  • Posts: 151
  • This is a good day!
Re: How would you power this thing?
« Reply #13 on: October 19, 2015, 03:06:35 PM »
Mentos and Coke is just the kind of free thinking we should be looking for. i think..
Though my Koi fish may not like the idea so much, Kinda fogs up the water.

Ahh, I missed the environmental point here, so I guess chemical reactions all together are sorta out here.

How about a propeller in the air, on a servo to steer. Perhaps on a small constant speed gas engine, use a second servo to point it upwards if you want to stand still.

Impala

  • Member
  • *
  • Posts: 185
  • Henbane Wellington Soufflage
Re: How would you power this thing?
« Reply #14 on: February 16, 2016, 12:30:47 AM »
There is one problem with using soda bottles as pontoons. I've made 2 RC boats with them years ago and they work great when driving forward. But as soon as you reverse (if the cap side is the back of the pontoon) the caps can dip into the water and flip the boat over backwards due to the shape angle difference. They did it with both 2 liter bottles, and 3 liter bottles. So I would doubt that a 1 liter bottle would be any different.

I believe you could compensate by limiting reverse. But it all depends on your project needs.

 

* Search


* Recent Topics

Sloooow progress on the I3 clone by KingBeetle
[July 16, 2018, 04:20:59 AM]


ESP32 - Stepper - LIDAR - Platform by jinx
[July 15, 2018, 04:58:51 AM]


MKS Gen L 1.0 by jinx
[July 15, 2018, 03:55:57 AM]


Motor rewinding machine by 1 what
[July 10, 2018, 06:03:46 PM]


All the stories in the forum are most important. by ZeroMax
[July 01, 2018, 09:44:53 PM]


Parallax CR Servo with Built-In Encoder by 1 what
[June 28, 2018, 12:13:32 PM]


He's Back...BoB V3.0 by k120189
[June 21, 2018, 07:03:17 PM]


Funding by MEgg
[June 21, 2018, 04:34:36 PM]


Robot Hive by jinx
[June 12, 2018, 03:58:03 AM]


Hi, Mushroom glue here. by Andrewsz
[June 11, 2018, 12:23:20 AM]


CZ-1 2.0: problems, calibration and printing, part2 by MEgg
[June 10, 2018, 06:10:53 AM]


Greetings! by Protowrxs
[June 05, 2018, 04:45:02 PM]


Raspberry Pi / Python eBook - free for the next 11 hours! by MEgg
[June 04, 2018, 05:21:07 PM]


All metal Titan Extruder by jinx
[May 27, 2018, 04:24:23 AM]


UConduit H-Bot printer design by KingBeetle
[May 26, 2018, 02:10:38 PM]

* Recent Posts

Re: Sloooow progress on the I3 clone by KingBeetle
[July 16, 2018, 04:20:59 AM]


Re: Sloooow progress on the I3 clone by MEgg
[July 15, 2018, 08:44:53 AM]


Re: ESP32 - Stepper - LIDAR - Platform by jinx
[July 15, 2018, 04:58:51 AM]


Re: MKS Gen L 1.0 by jinx
[July 15, 2018, 03:55:57 AM]


Re: Sloooow progress on the I3 clone by jinx
[July 15, 2018, 03:46:18 AM]


Re: MKS Gen L 1.0 by KingBeetle
[July 14, 2018, 04:05:49 PM]


Re: Sloooow progress on the I3 clone by KingBeetle
[July 14, 2018, 11:13:35 AM]


Re: ESP32 - Stepper - LIDAR - Platform by 1 what
[July 14, 2018, 07:02:46 AM]


Re: Sloooow progress on the I3 clone by MEgg
[July 14, 2018, 05:38:34 AM]


Re: Sloooow progress on the I3 clone by KingBeetle
[July 14, 2018, 03:45:21 AM]


Re: ESP32 - Stepper - LIDAR - Platform by jinx
[July 14, 2018, 02:49:04 AM]


Re: ESP32 - Stepper - LIDAR - Platform by 1 what
[July 13, 2018, 10:03:12 PM]


Re: ESP32 - Stepper - LIDAR - Platform by Gareth
[July 13, 2018, 04:19:01 PM]


Re: ESP32 - Stepper - LIDAR - Platform by jinx
[July 13, 2018, 01:33:15 PM]


ESP32 - Stepper - LIDAR - Platform by Gareth
[July 13, 2018, 04:28:46 AM]